How to Fix a Broken Outlet in Your Home in Allentown

How to Fix a Broken Outlet

If you have a broken outlet in your home, don’t worry – we’re here to help! In this blog post, we will walk you through the steps you need to take to fix the problem. This is an easy process, but you must follow the instructions carefully. We also recommend you call a professional if the problem is outside your skill level. With that said, let’s get started!

Tools and Supplies You will Need

  • Screwdriver
  • Wire strippers
  • Electrical tape
  • New outlet (if necessary)
  • Circuit breaker (if necessary)

Safety Considerations

Before you begin, it’s important to understand the basics of electrical safety. Always ensure the power is turned off at the circuit breaker before working on any electrical projects in your home. If you are unsure how to do this, please consult a professional electrician. Also, wear rubber gloves and avoid standing in water while working on any electrical project.

5 Easy Steps to Fix Your Broken Outlet

Electric Outlet not working? Don’t panic! Just follow these five easy steps, and you’ll have it fixed.

Step One: Check the Circuit Breaker

The first thing you’ll want to do if an outlet in your home isn’t working is check the circuit breaker. If the breaker is tripped, flip it to the OFF position and back to ON. If the breaker trips again, there may be a problem with one of the devices on that circuit or with the wiring itself.

Step Two: Check for Loose Wiring

If the issue isn’t with the circuit breaker, you’ll want to check for any loose wiring. This is especially common in older homes where outlets may not have been installed properly. To check for loose wiring, remove the face-plate of the outlet and tighten any screws that may be loose.

Step Three: Replace the Outlet

If you’ve checked the circuit breaker and all of the wiring appear tight, the next step is to replace the outlet. This is a relatively easy process that anyone can do with little time and effort. Turn off the power to the outlet at the circuit breaker, remove the old outlet, and install the new one. Use proper electrical tape or wire nuts to secure any loose wires.

Step Four: Inspect for Damage

Once you have replaced the outlet, it’s important to inspect all of the wiring for any damage. If you see any frayed or exposed wires, it’s best to err on caution and replace them. Exposed wires can be a serious fire hazard, so it’s not worth taking any chances.

Step Five: Test the Outlet

Once you have inspected the wiring and replaced any damaged wires, it’s time to test the outlet. Turn on the power at the circuit breaker and plug something into the outlet to see if it works. If it does, then you’re all done! Congratulations on successfully fixing your broken outlet.


Electricity is an important part of our lives, and it’s crucial to know how to fix a broken outlet in your home. We hope this article has given you the information you need to feel confident in repairing your outlets. Remember, if you feel unsafe or uncomfortable doing electrical work at any point, please call a professional in Allentown.